TA212 adapter

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Cliff Roberts
Newbie
Posts: 8
Joined: Thu Jan 12, 2017 4:57 am

TA212 adapter

Post by Cliff Roberts »

Is there an adapter for the ta212 to adapt the flare to standard pipe? I have some glowplug adapters that use a Parker quick coupler.

ben.martins
Pico Staff Member
Pico Staff Member
Posts: 539
Joined: Tue May 16, 2017 1:02 pm

Re: TA212 adapter

Post by ben.martins »

Hi Cliff,

I think what you are after is this. https://www.picoauto.com/products/press ... ptor-kit-b

I believe the rectus fittings are what Parker use but there is more information on this page.

Let me know one way or the other.

Kind regards

Ben

Cliff Roberts
Newbie
Posts: 8
Joined: Thu Jan 12, 2017 4:57 am

Re: TA212 adapter

Post by Cliff Roberts »

Thanks for the reply and link. I don't think that is the correct coupler. From what I can tell, its a Parker ST series. I was able to build a 1/4" hose w/ 1/8" pipe fittings on both ends that I could then install the couplers needed.
Attachments
20181029_103814.jpg
Last edited by Cliff Roberts on Thu Nov 01, 2018 8:08 pm, edited 1 time in total.

ben.martins
Pico Staff Member
Pico Staff Member
Posts: 539
Joined: Tue May 16, 2017 1:02 pm

Re: TA212 adapter

Post by ben.martins »

Hi Cliff,

Glad you managed to come up with a solution. Let me know how the results come out if you try out compression testing!

Kind regards

Ben

Post Reply