Mondeo charging issue

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Mondeo charging issue

Post by victor2k »

Hello,
On a 2010 Mondeo WF0GXXGBBGAPxxxxx I have a charging issue,fault code stored P1623-08.
No data on LIN bus between ECU and Alternator,the charging will start only if the engine speed is increased over 2000 rpm.
Someone can help me with the wiring from ECU to alternator?
Thank you
Attachments
Ford_Mondeo_2010_20180807-0002.psdata
(7.53 MiB) Downloaded 462 times
Top
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: Mondeo charging issue

Post by victor2k »

Solved.
Here is a good LIN signal
Attachments
Ford_Mondeo_2010_Diesel_20180816-0001.psdata
(4.87 MiB) Downloaded 449 times
Top
kona
TwoWaves
TwoWaves
Posts: 66
Joined: Thu Feb 22, 2018 8:14 pm

Re: Mondeo charging issue

Post by kona »

What was ? ... gray wire ?
Thank you.
Top
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: Mondeo charging issue

Post by victor2k »

kona wrote:What was ? ... gray wire ?
Thank you.
Hello,
It was the blue/brown wire ...
Top
Post Reply

Return to “Diagnostic discussion”