sealey ta310

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
gbd8512
Newbie
Posts: 4
Joined: Fri Jul 20, 2018 12:46 pm

sealey ta310

Post by gbd8512 »

hi guys I have a sealey ta310 current clamp. my question is how do I set this up correctly in the pico library. I have added it but cant configure the outputs.

there are 2 selectors one for 20A one for 80A
20A output:100mV/A
80A output:10mV/A

how do I configure the pico software with these values or do I need to use maths to work it out?

any help would be great. regards. dani.

PicoMike
Pico Staff Member
Pico Staff Member
Posts: 338
Joined: Mon Jan 31, 2011 11:22 am
Location: UK

Re: sealey ta310

Post by PicoMike »

Hi - Take a look at setting up a custom probe :)

Here is some information: https://www.picotech.com/download/artic ... probes.pdf

Additionally there is a video guide for custom probes: https://www.youtube.com/watch?v=fmaUw2wU-OM

Hope this helps,


Mike
Mike Valentine
Online BDM: Pico Technology

gbd8512
Newbie
Posts: 4
Joined: Fri Jul 20, 2018 12:46 pm

Re: sealey ta310

Post by gbd8512 »

Thankyou ever so much. :)

Post Reply