Can I daisy chain PicoScope 3423 ?

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
kier

Can I daisy chain PicoScope 3423 ?

Post by kier »

We would like to monitor ignition/injection on V8 engines so we need 10 to 12 channel logging simultaneously. Can two or more 3423's be connected via USB hub and feed data into the software as one log ?

Kier.

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Daisy Chain

Post by Autonerdz »

Kier,

While you cannot daisy chain units together with PicoScope, you can accomplish your task another way. Adapters such as the Ferret 953 will allow you to input up to 10 cylinder secondary from a DIS system on one channel. This unit works very well with PicoScope. Then you can deploy a second channel with the low current probe to monitor all the injectors at a feed line. And you still have two more channels ;-)
Tom Roberts
(The Picotologist)
Autonerdz

Post Reply