current clamp

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
tkelly
Newbie
Posts: 6
Joined: Sun May 06, 2018 2:45 pm

current clamp

Post by tkelly »

Hello all
I am looking for some opinions on bnc jacks vs 4mm jacks. I currently have a TA009 current clamp and i use a bnc to 4mm jack adapter.I am looking to add a 2000 amp current clamp and was thinking about also getting it with 4mm jacks so it would also function with a dvom in field locations.I was wondering if there is any downside to getting it to use for two options.The other option is getting it with bnc and an adapter to 4mm ,just wondering if anyone has experience with this.

victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: current clamp

Post by victor2k »

Hello,
I use a BNC to 4 mm male adapter for TA167 with any voltmeter and is good for me :D
Best regards
Attachments
20180508_152103.jpg

Post Reply