ignition current

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
willie

ignition current

Post by willie »

hi , we having automotive kit .

i intend to measure voltage and current secondary ignition .
HT pick up clip able to use for Voltage ,how about current ?
please advise .

thk

willie

User avatar
ricardo
OneWave
OneWave
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Willie,

Thank you for your enquiry. The current flow on the secondary circuit is very small so it is not something worth looking at. We normally look at the current on the primary circuit by using the 60A clamp included in the kit.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply