ignition current

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply

ignition current

Post by willie » Mon Oct 17, 2005 5:05 am

hi , we having automotive kit .

i intend to measure voltage and current secondary ignition .
HT pick up clip able to use for Voltage ,how about current ?
please advise .



User avatar
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo » Mon Oct 17, 2005 1:22 pm

Hi Willie,

Thank you for your enquiry. The current flow on the secondary circuit is very small so it is not something worth looking at. We normally look at the current on the primary circuit by using the 60A clamp included in the kit.

Best regards,

Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply