Using edge count feature on crank sensor waveforms

Found a useful article or video on the web? Post links that will help other PicoScope users here.
Post Reply
Alan
Pico Staff Member
Pico Staff Member
Posts: 264
Joined: Thu May 25, 2006 8:02 am

Using edge count feature on crank sensor waveforms

Post by Alan »

A video showing how the edge counting measurement makes it easy to see how many teeth a crank sensor detects in a complete revolution and the degrees between them.


KimAndersen
TwoWaves
TwoWaves
Posts: 246
Joined: Fri Nov 30, 2012 2:53 pm
Location: Denmark

Re: Using edge count feature on crank sensor waveforms

Post by KimAndersen »

It a very good feature which I sadly not have been using before - but I will in the future. I have seen some videos where this function would be "the only thing to use" and here I'm thinking about cam/crank relations.

Its really amazing what this software can do. :wink:

Regards
Kim

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: Using edge count feature on crank sensor waveforms

Post by Steve Smith »

Hi Kim, I used this Edge Count feature during a nightmare ABS issue where it proved invaluable

https://www.picoauto.com/library/case-s ... -operation

I hope this helps to highlight another applictaion

Take care.......Steve

Post Reply