Uploading ps.data files

Ask any non-NVH related questions about using PicoDiagnostics software here.
Post Reply
Technician
TwoWaves
TwoWaves
Posts: 706
Joined: Thu Apr 24, 2014 8:32 pm

Uploading ps.data files

Post by Technician »

Please advise how to upload stored data files to the forum.

User avatar
PicoKev
TwoWaves
TwoWaves
Posts: 236
Joined: Thu Apr 05, 2012 9:16 am

Re: Uploading ps.data files

Post by PicoKev »

Below the box you wrote your post in there are 2 tabs "Options" is active by default.

Click on "Upload attachment"

Click "Choose File" box and highlight the file you want, hit "Open" and you will see the file name in the box next to the "Choose File" box.

Click "Add the file" and it will be uploaded and appear on the bottom of your post.

Keep the file sizes as small as you can by just saving the relevant screens (not all 1,000 buffers!)

Kev.

Technician
TwoWaves
TwoWaves
Posts: 706
Joined: Thu Apr 24, 2014 8:32 pm

Re: Uploading ps.data files

Post by Technician »

Thanks Kev.

User avatar
PicoKev
TwoWaves
TwoWaves
Posts: 236
Joined: Thu Apr 05, 2012 9:16 am

Re: Uploading ps.data files

Post by PicoKev »

No Worries.

How was the course?

Kev.

Technician
TwoWaves
TwoWaves
Posts: 706
Joined: Thu Apr 24, 2014 8:32 pm

Re: Uploading ps.data files

Post by Technician »

Monday was just an introduction, next Monday we are advised is workshop tasks/practice. The course is not actually covering electronics as I initially thought, the lecturer advises it is auto-electrical theory and workshop practice, actual working on real world problems in vehicle electrics and engine management, Chassis etc. We were advised the course is intense as there is much to get through, but that does not worry me.

Post Reply