Uploading ps.data files

Ask any non-NVH related questions about using PicoDiagnostics software here.

Uploading ps.data files

Postby Technician » Wed Sep 20, 2017 9:12 pm

Please advise how to upload stored data files to the forum.
Technician
TwoWaves
TwoWaves
 
Posts: 319
Joined: Thu Apr 24, 2014 10:32 pm

Re: Uploading ps.data files

Postby PicoKev » Wed Sep 20, 2017 10:23 pm

Below the box you wrote your post in there are 2 tabs "Options" is active by default.

Click on "Upload attachment"

Click "Choose File" box and highlight the file you want, hit "Open" and you will see the file name in the box next to the "Choose File" box.

Click "Add the file" and it will be uploaded and appear on the bottom of your post.

Keep the file sizes as small as you can by just saving the relevant screens (not all 1,000 buffers!)

Kev.
PicoKev
TwoWaves
TwoWaves
 
Posts: 104
Joined: Thu Apr 05, 2012 11:16 am

Re: Uploading ps.data files

Postby Technician » Wed Sep 20, 2017 10:38 pm

Thanks Kev.
Technician
TwoWaves
TwoWaves
 
Posts: 319
Joined: Thu Apr 24, 2014 10:32 pm

Re: Uploading ps.data files

Postby PicoKev » Wed Sep 20, 2017 10:44 pm

No Worries.

How was the course?

Kev.
PicoKev
TwoWaves
TwoWaves
 
Posts: 104
Joined: Thu Apr 05, 2012 11:16 am

Re: Uploading ps.data files

Postby Technician » Wed Sep 20, 2017 11:29 pm

Monday was just an introduction, next Monday we are advised is workshop tasks/practice. The course is not actually covering electronics as I initially thought, the lecturer advises it is auto-electrical theory and workshop practice, actual working on real world problems in vehicle electrics and engine management, Chassis etc. We were advised the course is intense as there is much to get through, but that does not worry me.
Technician
TwoWaves
TwoWaves
 
Posts: 319
Joined: Thu Apr 24, 2014 10:32 pm


Return to PicoDiagnostics software

Who is online

Users browsing this forum: No registered users and 0 guests