Subaru Forester abnormal data

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Subaru Forester abnormal data

Post by victor2k »

Hello,
On a Subaru Forester petrol JF1SH5LP5XG044088 with high consumption and irregular idle I see only 32 fault code(lambda sonde not working or faulty) with x431 and ESI .
On secondary voltage I didn't see nothing abnormal(capture wasn't saved because of scope disconnection...),using FirstLook sensor connected to the pressure regulator I see a strange pressure variation in rail.
On the captured signal you can see the secondary ignition of cyl 1,FirstLook variation of rail pressure and the intake manifold pressure captured from map sensor.
On 2 cylinders you can see a small variation of pressure...this is normal(atenuator factor must be applied for 2/4cyl)?
Regards
Attachments
Subaru_Forester_Petrol_20170804-0001.psdata
(1.83 MiB) Downloaded 625 times

Post Reply