ta032

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
mn-bob
Newbie
Posts: 1
Joined: Mon Jan 23, 2017 5:38 pm

ta032

Post by mn-bob »

anyway of using as sync probe with 4425 scope?

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: ta032

Post by Autonerdz »

Sure. It produces a simple clean spike. It is directional so how you place it on a wire is dependent on the ignition polarity for that cylinder. When you have it right, the spike has a higher amplitude. Start with a 50v scaling and adjust from there. We actually include that in our Magnum and Ultra kits.

Post Reply