Citroen Relay 2.2 2013 Need good cam crank trace

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Dcunning35
TwoWaves
TwoWaves
Posts: 238
Joined: Thu Jan 28, 2016 12:33 pm

Re: Citroen Relay 2.2 2013 Need good cam crank trace

Post by Dcunning35 »

If you pm me il give my number I may be able to explain better.
Danny

Darren Cotton
TwoWaves
TwoWaves
Posts: 57
Joined: Thu Jun 16, 2011 9:53 pm

Re: Citroen Relay 2.2 2013 Need good cam crank trace

Post by Darren Cotton »

BK13XMS Relay 2.2 cam v crank 2 page.psdata
(3.16 MiB) Downloaded 910 times

Kevhutton
Newbie
Posts: 2
Joined: Wed Dec 12, 2018 7:56 pm

Re: Citroen Relay 2.2 2013 Need good cam crank trace

Post by Kevhutton »

Good morning, did this problem get resolved?
I have exactly the same issue with my 2013 Relay, P0016 appears as soon as the engine is started but the engine runs fine. I've had a new cam chain fitted and the timing rechecked, new crankshaft sensor, new camshaft sensor, tested the wiring to the ECU from each sensor. The van runs fine for a few thousand miles until the DPF dosing pump fails then goes into limp mode with the check engine light on. If I replace the DPF pump it runs fine again. After every 5mins of driving it does a DPF clean until the dosing pump fails (I'm assuming that this is linked to the can/crank synchronization problem on P0016).
Any help would be appreciated....
Thanks

Arek
Newbie
Posts: 1
Joined: Tue Sep 12, 2023 12:08 pm

Re: Citroen Relay 2.2 2013 Need good cam crank trace

Post by Arek »

Hello, do you solve the problem? I have the same.

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: Citroen Relay 2.2 2013 Need good cam crank trace

Post by Martyn »

If you look at the dates of the posts they are old so you are unlikely to get a response, as the poelp may no longer be acitve on the forums. I would suggest you post your issue, and what information you have gathered to date in a new topic to see if anyone can assist.
Martyn
Technical Support Manager

Post Reply