How can I get “mode & PIDs” from raw OBD2 identifier 11 or 2

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
anitaeugene
Newbie
Posts: 1
Joined: Sun Nov 27, 2016 8:39 am

How can I get “mode & PIDs” from raw OBD2 identifier 11 or 2

Post by anitaeugene »

Hi
I have connected OBD2 and getting the can data (11bit 500kpbs CAN) using atmel can controller. I get data. Now, how to I get the mode and PIDs from this data? Ex. My data looks like this 15164A8A-FF088B52 -- Data: 00,00,00,86,9C,FE,9C,FE, I could see RPM changing, ignition on/off etc... on the data fields I don't want to use ELM chips. Need to handle raw data directly.
Thanks for the help Eugene

Post Reply