206 1.4 HDi non start

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
dansully84
Newbie
Posts: 2
Joined: Wed Aug 10, 2016 8:03 am

206 1.4 HDi non start

Post by dansully84 »

Hi chaps,

I have a Peugeot 1.4 hdi 8HZ engine code which had a new engine fitted. when cranking it briefly fires on the first couple of turns but then stops and just cranks with no action. Fuel pressure measured is correct to the reference value, no immobiliser issues. Engine ecu keeps storing intermittent cam sensor signal faults. replaced sensor after checking wiring and still the same. I have attached a waveform file for cam and crank sensors. These look to be correct. Can anyone confirm they are correct and any advice? The engine was supplied bare so everything got swapped over from the old unit.
Attachments
Peugeot_206_2006_Diesel_20160810-0001.psdata
(18.3 MiB) Downloaded 551 times

dansully84
Newbie
Posts: 2
Joined: Wed Aug 10, 2016 8:03 am

Re: 206 1.4 HDi non start

Post by dansully84 »

This is sorted now. The scope images attached are good signals and in sync. Turned out the engine ecu software was some how corrupted. Ecu software update downloaded with Peugeot planet. Started on the button.

User avatar
STC
Banned
Posts: 790
Joined: Sun Sep 13, 2015 2:10 am

Re: 206 1.4 HDi non start

Post by STC »

Please upload that known good forum to the Library. I for one would thank you for that.

Post Reply