Serial Decoding Error

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
User avatar
Belet
OneWave
OneWave
Posts: 28
Joined: Mon Jun 01, 2015 1:29 am

Serial Decoding Error

Post by Belet »

Hi, all
When I captured the CAN-H and CAN-L signals and decoded them on the software of version 6.11.12, I found the decoded data was error. So I decided to do it on a very old version 6.6.28. and got the proper data.
It might be a bug that caused the problem? :?: :idea:

And from some of my customers' view, the Serial Decoding interface is not so friendly as the old interface. They'd like to request the old Serial Decode interface if possible :roll:

Best wishes
Belet

PicoPhil
Pico Staff Member
Pico Staff Member
Posts: 71
Joined: Thu Dec 23, 2010 11:38 am

Re: Serial Decoding Error

Post by PicoPhil »

I am sorry that you have experienced a problem with our software and will investigate. Thank you for the comment about liking the old version of software and will pass onto the team.
Philip

Post Reply