new member

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Post Reply
eldog79
Newbie
Posts: 4
Joined: Mon Jun 13, 2016 8:00 pm

new member

Post by eldog79 » Wed Jul 13, 2016 9:40 am

hi my name is craig i work for a small garage in cornwall.do quite a lot of diagnostic work ,the tool is very good.got the pico four channel scope just wanted to know how to upload waveforms on the libary.
thanks

AuthorMike
Pico Staff Member
Pico Staff Member
Posts: 333
Joined: Mon Jan 31, 2011 11:22 am
Location: UK
Contact:

Re: new member

Post by AuthorMike » Wed Jul 13, 2016 4:13 pm

Hi There and welcome to the forum.

You can find the Waveform Library under the File menu in the PicoScope software. You sign-in to the library using the same credentials as you use for this forum, and must have a PicoScope connected and an internet connection.

Once you are signed in, you can actually close the library itself and perform your tests as normal. When you then choose File > Save, you can choose Save and Share.

This will save a local copy to your PC and will upload the waveform to the library.

Any problems, just drop me a message here :)
Mike Valentine
Technical Author @ Pico Technology UK

PicoPhil
Pico Staff Member
Pico Staff Member
Posts: 71
Joined: Thu Dec 23, 2010 11:38 am

Re: new member

Post by PicoPhil » Wed Jul 13, 2016 4:41 pm

Hi
There is a you tube video on the waveform library, explaining how to save a waveform and logon.

Thanks
Philip

eldog79
Newbie
Posts: 4
Joined: Mon Jun 13, 2016 8:00 pm

Re: new member

Post by eldog79 » Wed Jul 13, 2016 9:30 pm

thanks for the info guys.would it be good to upload lots of waveforms on the libary to help each other out

Post Reply