Book for NVH study

Ask questions relating specifically to the PicoDiagnostics NVH equipment and software here.

Book for NVH study

Postby volrem » Fri Jun 10, 2016 11:23 am

Hi

Anyone can recommend some good book or some other source that can help study and understand NVH diagnostics better?

Any live hands on training would be great also.

Regards,
Ahti
volrem
Guru
Guru
 
Posts: 162
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Book for NVH study

Postby Steve Smith » Fri Jun 10, 2016 1:51 pm

Hello Ahti and thank you for your post.

Contained within the NVH software are 2 forms of help

Content help:
CONTENTS HELP-NVH.jpg


Show vibrate help:
SHOW VIBRATE HELP-NVH.jpg


There are 2 NVH case studies available too:

https://www.picoauto.com/library/case-s ... ration-nvh
https://www.picoauto.com/library/case-s ... serati-nvh

Unfortunately these case studies do not incorporate Three Axis Mode measurements as they were carried out before the release of the current NVH kit.

They do however contain theoretical information and describe the functions within the NVH software

We have scheduled time in the near future for a number of bite-sized NVH videos that will assist with the set-up of the tool.

As for books Arjen you are right, they appear scarce.

I have however found a Toyota publication immensely helpful when looking at NVH theory,
Publication number DM 016E

I hope this helps, take care......Steve
Steve Smith
Pico Staff Member
Pico Staff Member
 
Posts: 442
Joined: Sun Aug 25, 2013 7:22 am

Re: Book for NVH study

Postby Mark Dalton » Thu Jun 16, 2016 6:54 am

Google "Volkswagen Noise, Vibration and Harshness Technical Service Training" there's a pdf kicking around of this study program that is pretty good for beginners. Goes into all the basics about frequency, 1st and 2nd. order vibrations etc.
You could also have a look at http://alflash.com.ua/avtovideo/noise/F ... 0NOISE.pdf
User avatar
Mark Dalton
Advanced User
Advanced User
 
Posts: 60
Joined: Mon Dec 01, 2014 9:35 pm
Location: Melbourne

Re: Book for NVH study

Postby Belet » Mon Jul 18, 2016 6:15 am

Mark Dalton wrote:Google "Volkswagen Noise, Vibration and Harshness Technical Service Training" there's a pdf kicking around of this study program that is pretty good for beginners. Goes into all the basics about frequency, 1st and 2nd. order vibrations etc.
You could also have a look at http://alflash.com.ua/avtovideo/noise/F ... 0NOISE.pdf

Great! Mark
I have had a quick look at the two books you recommended.
Both are rather suited to beginners.
Many thanks

Kind regards
Belet
User avatar
Belet
User
User
 
Posts: 28
Joined: Mon Jun 01, 2015 1:29 am


Return to PicoDiagnostics NVH

Who is online

Users browsing this forum: No registered users and 0 guests