Hi

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Post Reply
asmodai66
Newbie
Posts: 1
Joined: Tue Apr 19, 2016 11:24 am

Hi

Post by asmodai66 »

Hi my name is Bora, I run my own garage we specialise in german vehicles.
I have an issue with a BMW E60 530d which I am trying to test the DDE-CAS wake up line. Does anyone know how to setup for the square wave pattern I need to see for this?

Many thanks
Bora

User avatar
STC
Banned
Posts: 790
Joined: Sun Sep 13, 2015 2:10 am

Re: Hi

Post by STC »

I am trying to test the DDE-CAS wake up line.
Do you know what communication protocol that line uses ? Are you using a Picoscope ?

Have you tried leaving it set to "AUTO"

EAAD
TwoWaves
TwoWaves
Posts: 65
Joined: Mon Apr 04, 2016 12:15 pm

Re: Hi

Post by EAAD »

There is not enough information in the question imho? What's the "issue"?

CAS is attached to the bus on the e60 via K-CAN

There are 2 power options on this system...... Basic & Advanced Power Management options & will test different but may have the same signal?

As STC suggests, Pico auto settings will give you a base line to start and then open it up via both axis? If needed? But I cannot identify the connection, BMWTIS.com may give you workshop data further to my knowledge and may contain the information required?

Post Reply