esta analise e do eletroinjetor de um gm montana motor 1.8 f

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
xandro
OneWave
OneWave
Posts: 37
Joined: Thu Mar 24, 2016 12:53 am

esta analise e do eletroinjetor de um gm montana motor 1.8 f

Post by xandro »

[The extension bmp has been deactivated and can no longer be displayed.]

:lol:

User avatar
Fat Freddy
TwoWaves
TwoWaves
Posts: 335
Joined: Fri May 04, 2012 4:52 am

Re: esta analise e do eletroinjetor de um gm montana motor 1

Post by Fat Freddy »

Hi

Do you have the other image? Both appear to be the same. :(

HTH
FF

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: esta analise e do eletroinjetor de um gm montana motor 1

Post by Martyn »

I believe this was in error, the second image has been removed.
Martyn
Technical Support Manager

busjockey
OneWave
OneWave
Posts: 22
Joined: Mon Jun 09, 2014 1:34 am

Re: esta analise e do eletroinjetor de um gm montana motor 1

Post by busjockey »

It looks like by your scaling that it is at 10 volts per division and the Injector bat supply is at 14-15 Volts and the ground is at 8-900 millivolts, However I don't know how you have your amp clamp set up. How many millivolts per amp is is on your clamp? Also I'm sorry but I don't understand your language and I don't have a translator. I need to understand your question first before going any farther. :)

User avatar
STC
Banned
Posts: 790
Joined: Sun Sep 13, 2015 2:10 am

Re: esta analise e do eletroinjetor de um gm montana motor 1

Post by STC »

injetor montana flex.bmp
:lol:
Google translates this as
can see that this gun (gun being injector ??) does not have open issues and injector needle closure but already I will post a picture of the same car but with gun with locked needle and opening not enough to feed the cylinder, have current inductive kick is that the current circulates in enrrolamento is not being enough to move the needle and act correctly, this vehicle was running with bad fuel smell at the exhaust and as here in Brazil we use ethanol and issuportavel smell.
-->
xandro wrote:
injetor montana flex.bmp
:lol:
Google translates this as
can see that this gun (gun being injector ??) does not have open issues and injector needle closure but already I will post a picture of the same car but with gun with locked needle and opening not enough to feed the cylinder, have current inductive kick is that the current circulates in enrrolamento is not being enough to move the needle and act correctly, this vehicle was running with bad fuel smell at the exhaust and as here in Brazil we use ethanol and issuportavel smell.