Glow plug current measurement

Ask any non-NVH related questions about using PicoDiagnostics software here.
Post Reply
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Glow plug current measurement

Post by victor2k »

Hello,
Last week I checked a Skoda Octavia III /CAYC engine type for glow plug fault code.
In Waweform Library Browser I can't find a good capture.
The singal was registered when the active test for glow plug relay was on.
I was used Pico 4425 and TA018(on 20A scale).
How I can add a good capture ?
Thank you.
Attachments
t bujie3 cayc 1.6.psdata
(466.06 KiB) Downloaded 580 times

taho

Re: Glow plug current measurement

Post by taho »

This is also a good capture. Try also to use on the timeline - 1 s /div ( instead of 10 ms / div).
You should also check the remaining glow plug.

volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Glow plug current measurement

Post by volrem »

Hi


Instructions how to use waveform library and add capures can be found here: topic10063.html

Post Reply