vivaro cam and crank

Ask for and share advice on using the PicoScope kit to fix vehicles here.

vivaro cam and crank

Postby Tim mad » Tue Dec 08, 2015 2:35 pm

Hello All

I'm after a known good cam and crank waveform for a 2011 Vauxhall Vivaro 2.0 M9R. Any help would be gratefully appreciated.

Thank you
Tim
Tim mad
Newbie
 
Posts: 8
Joined: Sat Jun 29, 2013 9:20 pm

Re: vivaro cam and crank

Postby Steve Smith » Thu Dec 10, 2015 1:20 pm

Hello Tim and thank you for the post.

I am a little confused here as the Waveform library does have the vehicle you are looking for uploaded by a user called "Tim Mad"

Was this uploaded after your post? If so I hope you resolved the concern?

Take care.....Steve
Steve Smith
Pico Staff Member
Pico Staff Member
 
Posts: 442
Joined: Sun Aug 25, 2013 7:22 am

Re: vivaro cam and crank

Postby Tim mad » Thu Dec 10, 2015 4:21 pm

Hello Steve
I posted that last night. Was about to call off the search, then i saw your reply.Got a friend to come down with there van and got the waveforms i needed.

Regards Tim
Tim mad
Newbie
 
Posts: 8
Joined: Sat Jun 29, 2013 9:20 pm

Re: vivaro cam and crank

Postby Steve Smith » Fri Dec 11, 2015 12:18 pm

Cheers Tim and thanks for sharing too.

I am sure somebody somewhere will be singing your praises when one of these arrives running like a ........

Take care.......Steve
Steve Smith
Pico Staff Member
Pico Staff Member
 
Posts: 442
Joined: Sun Aug 25, 2013 7:22 am

Re: vivaro cam and crank

Postby victor2k » Thu Jan 28, 2016 7:35 am

Hello,
Here you find the requested cam/crank signals from a Opel Vivaro 2.0 CDTI M9R780:
Attachments
171895.rar
(23.43 MiB) Downloaded 114 times
victor2k
Advanced User
Advanced User
 
Posts: 75
Joined: Thu Jan 28, 2016 7:17 am


Return to Diagnostic discussion

Who is online

Users browsing this forum: No registered users and 0 guests