TA012 question

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
ylo58
Newbie
Posts: 1
Joined: Mon Oct 11, 2004 6:05 pm

TA012 question

Post by ylo58 »

The TA012 break out lead looks like an useful item. Unfortunately the local dealers do not carry it, so I need to ask how it works:
are the connectors car make specific, or is there an universal trick to connect them?
Can it be used also with some 5-pin sensors, like MAF sensor?

Thank you in advance,

Ulo Mets.

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

TA 012

Post by Autonerdz »

The breakout lead is designed for an injector. It connects to many of them, but not all. It's nice to have but it doesn't do anything you can't do by backprobing. It cannot be used on MAF sensors.
Tom Roberts
(The Picotologist)
Autonerdz

Post Reply