Beta software 6.11.7 Crank Maths Channel

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Beta software 6.11.7 Crank Maths Channel

Post by volrem »

Good old non-UK regional settings problem. You are in Denmark so using different settings for decimal? At least math channels that need comma don't still work correctly with Estonian settings because these are different than UK.
Top
KimAndersen
TwoWaves
TwoWaves
Posts: 248
Joined: Fri Nov 30, 2012 2:53 pm
Location: Denmark

Re: Beta software 6.11.7 Crank Maths Channel

Post by KimAndersen »

Thank you for this information - Volrem

I remembered that this is not the first time I've had this problem, but in another software version. At this point, it was possible to solve this annoying problem with this comma by using another keyboard character, but now there no solution to this problem !!!.

Whats to say - maths is cool if its working correctly. :wink:

Regards
Kim
Top
volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Beta software 6.11.7 Crank Maths Channel

Post by volrem »

At the moment ; instead of , works for me.
Top
KimAndersen
TwoWaves
TwoWaves
Posts: 248
Joined: Fri Nov 30, 2012 2:53 pm
Location: Denmark

Re: Beta software 6.11.7 Crank Maths Channel

Post by KimAndersen »

BTW that little tip you gave me here worked perfect.

Thanks a lot Volrem. :wink:

Regards
Kim
Top
Post Reply

Return to “PicoScope 6 Automotive software”