Mondeo 2004 2,0 HE SEFI Misfire

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
Post Reply
terbo
TwoWaves
TwoWaves
Posts: 69
Joined: Sun Jul 06, 2014 2:40 pm

Mondeo 2004 2,0 HE SEFI Misfire

Post by terbo »

Hi,

The Mondeo of Co-Worker misfires at almost every accelaration.

We only had a few Minutes because of his Wife and Child,sitting in the Car
we took a few Samples, that don´t look good.

I connected a Sekandary Probe to the Coil Wires and the Amp Clamp to
the Common Coil (3-Pin Connector)

On Both Cyl.1+4 there were these "bad" looking patterns at almost
every Snap, and on Cyl. 2+3 they all looked fine to me.

The Sparkplugs were replaced last week.

I would think this should be a bad Coil ?

Greets Chris
Attachments
3-1.psdata
Cyl. 3 + Coil
(963.23 KiB) Downloaded 648 times
zyl4.psdata
Cyl. 4 + Coil
(974.2 KiB) Downloaded 628 times

terbo
TwoWaves
TwoWaves
Posts: 69
Joined: Sun Jul 06, 2014 2:40 pm

Re: Mondeo 2004 2,0 HE SEFI Misfire

Post by terbo »

Yes, Coil was faulty, new Coil fitted today - all Problems solved.
Runs like brand new :)

xandro
OneWave
OneWave
Posts: 37
Joined: Thu Mar 24, 2016 12:53 am

Re: Mondeo 2004 2,0 HE SEFI Misfire

Post by xandro »

[The extension bmp has been deactivated and can no longer be displayed.]


Post Reply