toyota 3.0L 1MZFE crank cam signal waveform

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
evanlip
OneWave
OneWave
Posts: 12
Joined: Sat Jan 04, 2014 1:11 pm

toyota 3.0L 1MZFE crank cam signal waveform

Post by evanlip »

Hi,need some help here,does anyone have known good toyota 1MZFE 3.0L crank and cam waveform?coz i suspect a jumped teeth timing belt.
hope you guys can give me a hand here.
thank you..

Chris C Stahl
OneWave
OneWave
Posts: 20
Joined: Mon Jun 09, 2014 2:22 am

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by Chris C Stahl »

What year is this toyota?

evanlip
OneWave
OneWave
Posts: 12
Joined: Sat Jan 04, 2014 1:11 pm

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by evanlip »

hi,its year 1999,the model is Toyota Harrier in Japan,but many model uses the same engine,so i hope its the same.

Chris C Stahl
OneWave
OneWave
Posts: 20
Joined: Mon Jun 09, 2014 2:22 am

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by Chris C Stahl »

I have two engines for that year one is a vvt
Attachments
toyota 3.jp.jpg
toyota 2.jp.jpg

evanlip
OneWave
OneWave
Posts: 12
Joined: Sat Jan 04, 2014 1:11 pm

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by evanlip »

HI,THANKS FOR THE SHARING,MINE IS VVT ENGINE,SO WHICH ONE SHOULD I REFER TO?
THE SECOND CAPTURE WITH GREEN COLOR?
DID YOU CONNECT TO ITS BOTH CAM SIGNAL AND THE CRANK SIGNAL?

Chris C Stahl
OneWave
OneWave
Posts: 20
Joined: Mon Jun 09, 2014 2:22 am

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by Chris C Stahl »

The green one is the vvt engine yellow is one cam, red is the second cam.green is for crank.

evanlip
OneWave
OneWave
Posts: 12
Joined: Sat Jan 04, 2014 1:11 pm

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by evanlip »

roger ,chris,thanx.....will hook up the scope tomorrow to check the waveform then..
thanx alot chris...

evanlip
OneWave
OneWave
Posts: 12
Joined: Sat Jan 04, 2014 1:11 pm

Re: toyota 3.0L 1MZFE crank cam signal waveform

Post by evanlip »

hi,chris,i have a capture of the signal.
is that not aligner?
it looks like a bit off from yours.
Attachments
mcu15 cam crank bad.psdata
my capture
(1.79 MiB) Downloaded 707 times

Post Reply