Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Post Reply
Posts: 1
Joined: Sat Dec 13, 2014 7:37 am


Post by rockford » Sat Dec 13, 2014 7:51 am


I have been using different scopes for a while now, but have recently purchased a Pico 4425. I have spent most of my career in the automotive world (about 10 years for Jaguar and Land Rover), but have recently started working for a company that makes industrial farm equipment. I hope to put the Pico Scope to use on the electronic controls for the hydraulic systems as well as the engines, chassis systems and maybe at some point using the WPS600 to analyse hydraulic system. I look forward to learning from you guys and I hope to be helpful as well. :D


Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 633
Joined: Sun Aug 25, 2013 7:22 am

Re: Hello

Post by Steve Smith » Mon Dec 15, 2014 1:43 pm

Hello Brad and welcome. Many thanks for your post and we look forward to any of your contributions as you are likely to see something different given your scope application.

Anything you have using the pressure transducer (should you go for the WPS 600) would be most appreciated.

Take care......Steve

User avatar
Posts: 45
Joined: Tue Aug 05, 2014 8:58 pm
Location: Slovenija

Re: Hello

Post by sigoaprendiendo » Sun Dec 28, 2014 11:13 pm

Hi rockford
Wellcome aboard!!!

We all are here to give and take.

Kind regards


Post Reply