Congratulations for the attachment, looks superbly...
Could you tell me please how do you know where to place the 0 º ruler and how to add this engine four stroke ID Chart. It is a veeeeeeery good information!!! PROFESSIONAL!!!
I was able to add the math channel but the Chart nor figure out where to place the angle rulers
Looking at the arrangement of the camshaft signal I was able to determine number 1 cylinder by comparing to an SSP from VW
SSP is a VW Self Study Program which I found on-line. These SSP's give an in-depth overview into the operation of the 3 cylinder engine and so allowed me to confirm number 1 cylinder
From the noise evident within the crankshaft signal I could determine the number 1 injection event and so evaluate all other events relative to the firing order.
The ID chart is a third party overlay software that I also searched for on-line.