SECONDARY IGNITION TESTING

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
picoautoelectric
Newbie
Posts: 1
Joined: Thu Nov 20, 2014 3:55 am

SECONDARY IGNITION TESTING

Post by picoautoelectric »

Hi I recently purchased the PICO SCOPE 4423 (with all the accessories that they offer) and I was wondering if anybody could tell me what leads do I need and the correct setup for looking at distributor ignition system as well as waste spark systems...

Thanks in advance
Top
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1672
Joined: Sun Aug 25, 2013 7:22 am

Re: SECONDARY IGNITION TESTING

Post by Steve Smith »

Hello and thank you for the post.

Within your PicoScope software we have the AUTOMOTIVE tab to enable you to connect and set the scope to capture numerous waveforms from varying styles of ignition systems.

I have attached an image below that should help you to get started.
IGNITION PRESET.jpg
I hope this helps, take care.......Steve
Top
Post Reply

Return to “Automotive kit hardware”