Timing Check

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
Post Reply
JOE TECH
Newbie
Posts: 8
Joined: Wed Jan 29, 2014 8:40 pm

Timing Check

Post by JOE TECH »

Got a MITSUBISHI SHOGUN 3.2 DIESEL 2008 Not start in workshop
Have taken compression test with pico (major fault)
Can anybody help with cam+crank scope test as I suspect timing chain has jumped
Thanks Joe

hijakd
OneWave
OneWave
Posts: 19
Joined: Wed Jun 25, 2014 1:38 pm

Re: Timing Check

Post by hijakd »

Hi just locate your cam and crank sensors and put them on two separate channels then have a look at the wave form,u may struggle if you don't have a good known wave form

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1578
Joined: Sun Aug 25, 2013 7:22 am

Re: Timing Check

Post by Steve Smith »

Hello Joe Tech and thank you both for the posts.

I have just taken a look at the Waveform Library but no joy for a comparison.

Can anyone upload such a waveform if possible to the waveform library?

From here Joe Tech you can then download a running example. Good luck and thank you for the appeal

Take care......Steve

Post Reply