Resistance Measurement

Ask any questions about using PicoScope Automotive software here.

Resistance Measurement

Postby swissmister » Sat Jun 28, 2014 1:47 pm

can the PicoScope software be configured to make resistance measurement in a fashion the TiePiescope does?
Posts: 5
Joined: Sun Jun 08, 2014 5:00 pm

Re: Resistance Measurement

Postby Steve Smith » Tue Jul 01, 2014 10:40 am

Hello Swissmister and thank you for the feedback. Interesting point you have raised regrading resistance measurement and how we choose to evaluate resistance.

One option would be a resistance measurement feature but we know the pitfalls of measuring resistance without load. (I have spent hours chasing my tail assuming continuity existed to find the circuit was failing under load)

Using the scope to measure voltage and current not only takes care of resistance when we apply ohms law, but also includes the circuit and terminations giving the user the complete picture.

I can see the relevance when we choose to measure component resistance under varying temperatures (removed from the circuit) and will add the suggestion into our "ideas funnel" as all feedback and suggestions are welcome.

Thanks again for the post, take care......Steve
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 430
Joined: Sun Aug 25, 2013 7:22 am

Re: Resistance Measurement

Postby DebbieSidera » Tue Sep 16, 2014 1:44 am

It could be so useful!
User avatar
Posts: 32
Joined: Mon Oct 21, 2013 12:39 am
Location: SAN DIEGO, CA

Return to PicoScope 6 Automotive software

Who is online

Users browsing this forum: No registered users and 3 guests