Pico Diagnostics Default Settings

Ask any non-NVH related questions about using PicoDiagnostics software here.
Post Reply
Ed P
Newbie
Posts: 5
Joined: Fri Apr 18, 2014 2:22 am

Pico Diagnostics Default Settings

Post by Ed P »

Is there a way to permanently change the default settings? I've changed them through the preferences tab but they reset upon restarting the program.

Thanks!
Ed

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: Pico Diagnostics Default Settings

Post by Steve Smith »

Hi Ed and thanks for the enquiry, sorry for my late reply. Can you let me know which test you are using in Pico Diagnostics or are you using PicoScope. The start up settings for PicoScope are found under the FILE menu and START UP SETTINGS if so.
Can you feedback when you can? Take care.....Steve

Ed P
Newbie
Posts: 5
Joined: Fri Apr 18, 2014 2:22 am

Re: Pico Diagnostics Default Settings

Post by Ed P »

Hello Steve,

I'm running the test through the Pico Diagnostics program. I see the settings you speak of in Pico Scope but not Pico Diagnostics.

Thanks,
Ed

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: Pico Diagnostics Default Settings

Post by Steve Smith »

Hello Ed, sorry for the late reply. I have just checked the latest version and you are right as it does not retain the pressure value or the measurement system. I will file a report and send this into the software team. This should therefore be resolved on the next build. Once again, thank you for pointing this out.

All the best.....Steve

Post Reply