Found pump, both power and PWM ground present and correct. and if powered manually by tapping a ground on and off the pump will dribble fuel out of pipe at vaporizer. launched a regen whilst monitoring EGT sensors 1 and 2 voltage with meter this time. to my surprise the EGT 2 voltage went right down...

Thanks for your help Danny I appreciate it. Where will I find this DPF pump? Just so I can do some checks there. As on the last regen that glow plug definitely had 12V at it and I still had no real temperature. The reason I am suspecting pump is the vaporiser was blocked solid and I wonder if it has...

So I have checked the vaporiser and it was blocked solid. I also checked the 12V supply to glow plug and it was present. So I fit new vaporiser and run regen and would you believe it temperature is still at 270 it finishes the process and says complete. The back pressure is exactly the same. Then I ...

The injector into the Exhaust is "SCR" is it not? To deal with NOx - Adblue ? That Injector and its supply pump can be activated by IDS ? to test it ? To be honest I am not sure it is the first time I have come across this system Heat up the Temp sensor with a flame, can it report more than 270 ? W...

Firstly can you clarify the age of this vehicle by injector in the exhaust I am assuming this is a vaporizer equipped system..

It is a 2013 and yes it is a vaporizer equipped system.
Should a good vaporizer not hold a vacuum? I will check the glow plug on it tomorrow thank you for your help.

Hi all the focus in question has been in twice now in the last 2 months. It is 1.6L diesel with DPF and CAT in one unit, directly after the manifold/Turbo. It also has the exhaust gas treatment fluid system (injector mounted before the CAT spraying treatment into the exhaust). It takes a while for t...

Yes you are correct when it done this to me I had the mouse pointer hovering over the channel tool bar at the top of the screen. I instantly moved the mouse pointer into the centre of the screen without pushing any buttons on the mouse or keypad and re-hit the space bar and it stopped the capture. K...

I am also using W10. Thanks for the tip I will keep you posted

Hi all, has anyone else had the space bar start/stop button intermittently not working? It's not a major issue it's just annoying when it does happen. For instance if I'm looking at ignition and I catch a glimpse of a misfire and it decides not to stop on the space bar I have to hope I can grab the ...

Not wishing to split hairs or be pedantic but I have always known CAN to be a 2 wire, twisted together and a mirror image of one another. I have seen wiring diagrams where the describe any type of network or communication line as CAN hence not strictly accurate and a pain for those of us that are a...