Can't upload psd files yet from our old lady, I'll try and upload the Pico 6 software today. I'm also going to try and find the common ground or ignition to get all for ramps on one page.

Hi guys I had a classic shorting primary wave form on cylnder three on a 1az engine in a 2010 Toyota Noah today. Current went straight up to 3 amps before starting to ramp up to 10 amps. Swapped the coil with cylinder number one and the "shorting primary" stayed in cylinder three. I measured the cur...

Thank you so much for the link vasek. It helps me a lot! Ill be sure to post any updates I can figure out how to capture sequential events.

Sorry I didn't leave a space between text and the link here it is again. https://bit.ly/3c6yhrI?fbclid=IwAR2VfhUUQ1qM1mXIMnlesKoilPW9ZP_fn0VdXIN_liw6d_9osyH-zms5DT4 It's a very interesting read for those interested in turbo systems. I've posted this thread in the hopes of trying to build a case stud...

Good morning all. We're working on a discovery 4 year: 2010 vin; SALLAAAF3AA548357 with a complaint of oil contamination on the MAF sensors. First thing we checked was whether or not the oil drain pipe mod has been done and the answer is no, however parts have been ordered and it's on its way. I'm h...

I'm pretty certain it's 64 Steve but I'll double check on Monday when I get to the workshop.

Thanks so much Steve.
So? If I download the pico 6 software will it over wrote my pico 5 software and render my ADC212 in operative?

Thanks Steve. The suffix is PSD (in caps). I have no problem opening them on my PC but when I want to share they don't appear on my drop down menu. I attached one of the unlocked files and sent it to the Pico support email you provided. Weird thing is when I previewed the sent email and tried to dow...

I'm using an ADC212 scope and when I save files they have a lock emblem over them and they are not visible when I try to share on this forum.

Do I have to save the file in a different format? I'm using windows 10

I am really struggling with the injector waveform on this vehicle and am asking if anyone can tell me where Im going wrong. This engine was overhauled and has been struggling to start since. It cranks,and tries to start almost as thought there is not sufficient fuel, fuel pressure has been checked a...