Hello Geoff, Welcome to the forum and your Pico journey! Great to have you onboard and we are all here to support and help you along the way. Nice to see your investing in the training for EV as the world slowly shifts towards this mode of transportation. I will point you towards the following post ...

Hello Burt_100, Thank you for your post. Lets tackle one thing at a time and to start with that it seems to not decode. This was due to a slight oversight in the decoder settings where the threshold was set to 3.6V and so outside of where the packet actually is. The decoder will try to fit the signa...

Hello all, I'm after some help. We all know that PicoScope can be used for more than just automotive vehicles - hence this section of the forum. It would be great to see more and more non automotive waveforms in the waveform library. Could I ask that if anyone as any waveforms that might be suitable...

Hi Hamish, Great to have you here and also thank you for imparting your knowledge for the future generations. The forum is a great with a lot of information to take in. To help contain all this information in one place we have a useful links page which you can see here - https://www.picoauto.com/sup...

Hi all, Thank you both for your comments and glad it is an interesting topic. There is lot still unknown about these motors. I have found an interesting PDF surrounding some of the use of hall sensors in these motors which is below. Hall sensors for 3 phase BLDC.pdf Of course this document won't be ...

Recently I found myself going back over some old captures to see which ones might be useful to upload to the waveform library and I stumbled upon some captures I made to follow up on the JCB JS220 EGR fault case study. You can see the full case study here - https://www.picoauto.com/library/case-stud...

Hello Koolaid2600, Great to hear you've got your PicoScope and getting to grips with the software. Can I ask which version of software you are using? PS6, PS7 Stable or PS7 Early Access. To give a little insight I will refer to PS7 Stable. The guided tests in PS7 Stable are built in with the install...

Hi RyanH,

We should be able to sort this for you.

Could I ask you to email into support@picotech.com and the forum admin team should be able to assist.

Kind regards

Ben

Hi Ryan, Sorry for the late reply on this. It sounds like this is going to be one of those jobs! I think we've got to try and get it back to stock software. There are too many variables going on that can be affecting the input. Would be interesting to know if these issues have been there since the d...

Thanks for sharing Paul. Great to see ScannerDanner getting involved with HD and I've no doubt it will help. For scope work in the states, worth checking out Diesel Laptops for scope work as they have a branded 4425A PicoScope as well as training. We are hoping to get more content for HD and OH avai...