Search found 1580 matches

by Steve Smith
Wed May 13, 2020 2:09 pm
Forum: PicoScope 7 Automotive software
Topic: picoscope 7
Replies: 1
Views: 5938

Re: picoscope 7

Hello Toni and thank you for the post. At present, PS7 has English and German language settings only but this will change as parity between PS6 and PS7 is a priority for Pico and the software teams Please keep an eye open for updates where you will find Language settings by clicking on More>Settings...
by Steve Smith
Wed May 13, 2020 11:40 am
Forum: Introductions
Topic: New member
Replies: 1
Views: 2600

Re: New member

Hello Toni and welcome to the forum.

Please feel free to browse and feedback on any of the numerous topics and posts covered

Take care.....Steve
by Steve Smith
Wed May 13, 2020 11:37 am
Forum: Diagnostic discussion
Topic: Picoscope For Marine (outboard & sterndrive) Use
Replies: 1
Views: 2298

Re: Picoscope For Marine (outboard & sterndrive) Use

Hello and thank you for the post Most certainly an Automotive PicoScope will be ideal for your Marine application as with other industries such as HGV, Industrial and Agricultural Regardless of the style of ignition system or on-board circuitry, the scope can be applied to measure voltage, current, ...
by Steve Smith
Wed May 13, 2020 11:04 am
Forum: Automotive kit hardware
Topic: TA018 Amp Clamp Negative mA reading?
Replies: 3
Views: 7395

Re: TA018 Amp Clamp Negative mA reading?

Hello and thank you for the post Could you confirm the vehicle under test uses a single 12 V battery and not 2 x 12 V batteries connected in parallel as here we could see reverse current flow due to battery charge equalization? It sounds like you have followed all the rules surrounding parasitic dra...
by Steve Smith
Wed May 13, 2020 10:36 am
Forum: Diagnostic discussion
Topic: A Shout for help.
Replies: 7
Views: 9092

A Shout for help.

Here is another one of those shouts for help with a case study that I have been working on for some time. To cut a long story short, I have a SEAT Alhambra Diesel with hesitation and holding back (hot engine) during light throttle, no engine load, 3rd gear at approx. 2000 to 2500 rpm Make – SEAT Mod...
by Steve Smith
Tue May 12, 2020 8:50 am
Forum: PicoScope 7 Automotive software
Topic: Maths is cool
Replies: 49
Views: 117914

Re: Maths is cool

Following on from our BNC+ resistance lead video here for the 4425A scope, a question was raised regarding the possibility of measuring resistance with the 4425 Scope Most certainly this is possible if we know the circuit we are measuri...
by Steve Smith
Wed May 06, 2020 6:21 am
Forum: PicoScope 6 Automotive software
Topic: Oscilloscope not recognized after update
Replies: 11
Views: 11242

Re: Oscilloscope not recognized after update

Hello and thank you for the feedback

There is no need to appologise, these are crazy times indeed

This is great news and good to hear.

You can most certainly use the new PicoScope 7 with your scope

This can be downloaded here

Take care.....Steve
by Steve Smith
Tue May 05, 2020 11:49 am
Forum: Diagnostic discussion
Topic: Abs light
Replies: 17
Views: 23946

Re: Abs light

Hello and thank you for the feedback “I’m not sure that it refers to speed sensors, looking on the internet you can find only that error description.” This concerns me as we must understand the description of the code or we are diagnosing parts of the ABS system that may not be relevant to the fault...
by Steve Smith
Tue May 05, 2020 9:02 am
Forum: PicoScope 7 Automotive software
Topic: PicoScope 7 Automotive Software
Replies: 139
Views: 192798

Re: PicoScope 7 Automotive Software

Once again thank you to the software teams for the latest version of PicoScope 7 version 7.0.46.5424 Math channels • Click on the More button in the left-hand tool panel to reveal all the available options for PicoScope 7 • Click on the Math Channel button to open the Math Channel Wizard Note: Click...
by Steve Smith
Fri May 01, 2020 12:20 pm
Forum: Diagnostic discussion
Topic: Abs light
Replies: 17
Views: 23946

Re: Abs light

Hello and thank you for the feedback Could you confirm the fault code generated is referring to a wheel speed signal? There is a very interesting line in Possible Causes “Modifications/Retrofits” Could we confirm wheel and tyre are the specified diameter, tyre configuration/circumference are the sam...