Hello, The compression not have any importance in this case...the engine start but ECU controls/corrections give me this issues. I disconnected VVTi controller,idle regulator,air/fuel sensors(both banks),camshaft sensor but the issue is the same:injectors command missing at some point. I have some t...

Hello, On a 2001 RAV4/1AZ-FE 4*4 AT I have a strange issue:the engine start ok but the idle is unstable and engine stop. I checked the relative compression:12,14,14,14 bar . No fault codes in ECU.I can acces data list only with engine stopped(data list refresh at 700-800 ms).When the engine is start...

Hello,
Will be solved the issue from File/Preferences/Regional and Language/Metric system for the Compression Test?
The results is show in Psi instead of Bar.
Thank you

Hello, Here is a new capture with the CAM/CRANK signals for reference and all spark plugs on engine I think the angular velocity of crankshaft isn't constant through 720*(intake from cyl 1 is in the same time with compression from cyl2 (with a higher compression) :?: One more question:why the crankc...

Hello, I have a 2004 Avensis 1ZZ engine type with the idle issue(the engine stall and sometime stop after warming phase) No faults in error memory,the throtlle body was replaced without any improvement. The oxigen sensor,maf,knock sensor was disconnected to disable lambda regulation,advance control-...

Hello, New day,new question:someone tested on a engine with the compression issues? According to the Pico diagnostics I have on Avensis 1ZZ-FE:10,12,13,13 bar compression. According to the real life I have :10,13,12,13. My question is:was the firing order included in program for 4 cyl or not? Tommor...

Hello, X-431PRO is very good on asian/koreean cars,KTS Bosch work good on european cars.Delphi/Autocom is good on frech cars.I used all but sometime isn't enogh... If you will need coding/adapting then search for a dedicated manufacturer tester:Techstream for Toyota,Star for Mercedes,Clip for Renaul...

Hi This might also be a potential issue, if you have serviced, or not, your sensor's bleed valve, of which there are 3 styles: pico wps500 bleed valves.png There may be a leak/Loose screw! (I think the early ones have a service kit available or O ring?) Or maybe some other defect there abouts? I'm ...

Hello, Will be added to the options a custom probes menu in Pico Diagnostics like in Pico Automotive? For example if I use a custom pressure sensor with Pico Automotive I can use Math or Custom probe options,but in Diagnostics I must use WPS500x.For now I can't afford the complete pressure kit...I u...

Hello,
The reference signal for camshaft isn't like my captured signal .
Also the replaced sensor wasn't OE.Again the aftermarket sensor make my life difficult.