I would start with a code read to ID the cylinder,if this is not possible then FLS/WPS in the tail pipe with a sync to ID the missing cylinder. Once ID'd would then pull the coil if possible and use a COP extension lead then use a secondary pick-up probe & have a look whats going on whether its a mi...

Luca

Yes it is possible by placing time cursors on lets say a WPS capture of compression at TDC with two "humps" on the screen then work it out from the time taken to do 720 degrees

Fav

I was surprised when you said a 3A fuse...........even a Ford guru suspected more in depth programming

Cars eh dont we just love em

Welcome along Fav.....how you get on with the jump started Focus ?

A few more details of the model/system would help too.

Donna

You will get a "mist" of oil in the intercooler but if you are talking puddles this wants looking in to

I should imagine that the supply voltage will remain NBV but the ground will be PWM which will be able to control the brightness of the bulb

Fill Whats the car run like as a whole ? Fuel pressure ? Can you force rich/lean when it sticks ? Whats the post O2 sensor doing when this flat lines at 100mv ? iirc the 2 sensors are the same, swap them over & see what you get ? When you have captured your waveform click on file & save (click on he...

Thanks Tom i'll give that a try (infraview) , i was aware of the screen capture method i was wondering whether the software could be edited to not have to do it this way ?

Cheers

Rob.

Hi there Pico team

Would it be possible to edit the Pico 6 automotive software so that when saving a current waveform as gif when zoomed in so it will save that actual screen instead of the original capture ?

Thanks.

Rob.