I understand and agree that you don't always want to filter out the noise. Many times it is the noise you want to see, because that is where the problem lies. You don't want to filter out what it is you are looking for! I would just like the option of doing it live, because there are many times wher...

Thx for the quick reply. I'm left wondering why I got other than Pico current clamps...I'm going to have to figure out how my Matco tool supplier got these for me. It all came with a pico case. I got a big white box with everything separate. I had to put it all together. I had had him buy the scope ...

Ok, what am I doing wrong? I was thinking it was a problem with filtering, but I'm not sure. Running Beta 6.7.2.1. I am using one channel with the PDI CA-600 600 amp current clamp I turned the 1k low pass filter on and didn't see any effect in the pattern being generated on the screen. I was noticin...

Thanx AutoNerdz, I'm still waiting for my Matco dealer to tell me how he got the scope. Perhaps he did buy it through you... Anyways, Thanks for the reply. You are reminding me of a project I once did where I was looking at address control lines of an Eprom. I wanted to swap one Eprom for another on...

Hello All, I keep reading all the posts here, and was recently reading about recording Waveforms and deriving MAF using math channel. They talked about making sure you were giving enough resolution to the waveform to ensure the math would come out right. I'm currently using the 4423 Automotive scope...

I think I understand what you are saying. Honestly, I changed nothing with connections and was able just by using the 6.7 software to no longer see the problem. When I said I started from scratch - I meant in software. I restarted the software, and added each channel instead of starting from 2 chann...

Just installed 6.7 and it not only worked with 3 channels well but a 4TH as well. AfterRepairs4runner.JPG So I guess it might have been just software. Been using my scope more lately and I swear half the time I need at least three channels. I still had the software freeze a copy times, and once had ...

I've included two snapshots that will probably better explain what has me scratching my head more than anything else. Here is the scope showing me a good patterns just moments before I add the third channel. GoodReading2channelsinuse.JPG Now here is what happens once I add the third channel? After3r...

Thank you both for such fast and helpful insight. I was really hoping to get this answer....and I'm glad to see that I was mistaken about the cam sensor. That will give me that third waveform I always seem to need in reserve. This falls in line with what I've seen in other cars....Crank Floating...C...

CamAndCrank.JPG Hello, I am curious if there is a good way to look at Cam and Crank Signals on a vehicle like this. I have two AC pulse generators that don't seem to share a common ground. Is there a way to use Math channels to display these two signals on my Picoscope 4423? Or do I really need a d...