Hello 13jurek13, Thank you for your post. I think there are a lot more questions than answers at this stage of the diagnosis. The EWD image you have supplied is a little confusing to say the least as there are multiple connections the the CAN wiring between the ABS, ECM, ESV1 (which I think is trans...

Hi Interrupt,

Thank you for lettings us know and the video. I ran into this same problem last week and it has been raised with the software team. I will add your video and your comments to the bug report and it will hopefully be fixed for the next release.

Thanks again,

Kind regards

Ben

That's very kind of you Jim! Not sure I would say an inspiration though! More someone that hopefully helps to make life a bit easier!

Thanks again and as always let me know if you need any support on this subject.

Kind regards

Ben

Hi Jim, Completely agree with the 10% of most pumps as a given loss due to internal leakages. This capture was taken from a K3V pump which has some internal control of the swash plate based on the back pressure generated through the pump. This gives this a pattern the appearance the flow dropping of...

As we all know networks on all types of machinery has been around for a lot longer than we give it credit for. From early begins of slow data exchanges between two or 3 ECU’s, today seems more than 30+ ECUs with everything from LIN to Ethernet. This combination of different networks is not uncommon ...

Welcome to the forum jibby365! Rest assured you are not alone with understanding what is good and what is bad and you've done the right thing in getting known good data to begin with. Scope diagnostics is split in half where 1st is the capture and 2nd is the analysis. There's no getting away from it...

Hi Littlejohn,

It's tricky to offer advice for high voltage testing on a public forum due to the dangers and risks involved.

Could I ask you to email into support@picotech.com and we can support you directly.

Kind regards

Ben

With thanks to the software teams, the improvements to each new release of PicoScope 7 Automotive continue to march on. I would like to share a new feature that has made it into the the build 7.0.73.8350 which is a new serial decoder specifically for the CAN protocol J1939. As with PicoScope 7 Autom...

Hi Kez, Apologies for the delay in getting back to you on this. I think I have what appears to be a common wiring diagram for this particular bike and also ties up with the wire colours you've added to the waveform in the library. I have to mention that bikes is not a well known area for me and if a...