managed to get pico's Delphi software to load????

hi its the 6.7.21 though tried older versions 2 of them

here is my file attached

just realised that it actually makes the shortcut's on the desktop briefly and then roll's back.

I tried it on xp compatability but still nt working

hi ive a new lappy on windows 8 and when I try to install pico 6 the latest one, It loads all the way up to near the end then just starts rolling back and wont install, has anyone seen this before?

hi guys just realised/remembered I had posted this here? the only codes were camshaft sensor codes I suspect a correlation code, and its showing no sync with cam/crank on diag, timing was checked and found good when pinned up and is still not showing as sync'd, its still in bits and my customer has ...

thanks arjen if you have a known good that will be great, think the bat was a bit low when I took this capture, I think the voltages may be low due to me not having the scope connected properly, I will hopefully get on it on sat and get some more testing done. :D got another capture here if you want...

looking for a known good for 2.0 hdi 307 2001 if anyones got one I would be gratefull, I will post one ive got and if anyone cares to take a look to see if its good that would be great

Kenny

Hi guys thanks for the help on this one ive learned alot and a bonus is the vehicle is now fixed, unfortuanatly ive no new data to post as ive been off work and customer has picked up car and took it away.

Will be back for mot shortly and will try and get some captures

many thanks

kenny

Update on this is i have sent ecu for testing/repair and will post back when i get a min

ive been posting on autonerdz feel free too have a look http://www.autonerdz.com/cgi/yabb2/YaBB ... 6200/30#30

I'm not an expert by any means but one thing i would say is, dont use pico diagnostics or pre sets, get into the habbit of setting it up your self for all tests, i tried with pico diag too but never got very good results so just set it up and switch cylinders, see what you get. post up the psdata fi...