Search found 79 matches

by Lee
Fri Apr 15, 2011 3:15 pm
Forum: PicoScope 6 Automotive software
Topic: Example multi-point injector (current) waveform ???
Replies: 3
Views: 8405

Re: Example multi-point injector (current) waveform ???

Dear Jim Thank you for bringing this to our attention. We will be reviewing our Help Files posted on our website in due course. In the mean time you can get up to date Help Pages through our Software which, if you dont have a PicoScope will run in DEMO mode allowing you to view all the presets and H...
by Lee
Thu Apr 07, 2011 5:45 pm
Forum: PicoScope 6 Automotive software
Topic: Mixmaster 12-channel
Replies: 3
Views: 9101

Re: Mixmaster 12-channel

Hi Shay The mixmaster is a good tool for analysing spark on multiple cylinders for upto 12 cylinders where you could only do 4 at once with the 4 channel scope.. The way in which the Mixmaster works is to give a comparison of the spark accross all cylinders. It does not give scaling i.e. if your pea...
by Lee
Fri Dec 10, 2010 10:11 am
Forum: PicoScope 6 Automotive software
Topic: Picoscope 6
Replies: 1
Views: 4935

Re: Picoscope 6

Hi Thank you for your forum post. Yes the 'ADC 3/50/100 Variants' will work on the PicoScope 6 Automotive Software Version. I hope this helps answer your question and if you have any further questions or queries then please dont hesitate to contact us. Kind Regards Lee - Automotive Technical Special...
by Lee
Mon Dec 06, 2010 2:20 pm
Forum: Automotive kit hardware
Topic: Graphing duty cycle
Replies: 3
Views: 8517

Re: Graphing duty cycle

Dear Chris Thank you for your post. Unfortunatly you cannot plot the 'Duty Cycle' as a graph. You can have it as a measurement by adding one using the following Steps:- Select the add measurement by clicking on the following Tabs: Measurements > Add Measurement > In the Dialog box that opens select ...
by Lee
Sat Dec 04, 2010 11:06 pm
Forum: Automotive kit hardware
Topic: Solid core plug wires & Secondary Ignition Pickup PP178
Replies: 3
Views: 8834

Re: Solid core plug wires & Secondary Ignition Pickup PP178

Hi Ben After speaking to my colleague we dont see a reason into why this wont work. You may find the Secondary Pick up Leads (Clamp) are slightly bigger for the single core cables as modern Silicone HT Leads are slightly thicker. This may affect the HT Reading but you should certainly be able to get...
by Lee
Mon Nov 15, 2010 9:56 am
Forum: Automotive kit hardware
Topic: Could mixmaster be used for parading primary inj voltage
Replies: 2
Views: 7164

Re: Could mixmaster be used for parading primary inj voltage

Dear Ben Thank you for your email into Technical Support. I have used the mix master myself for looking at Petrol Injection as the Absolute Voltage input of the Mixmaster is -4V to +4V. I have used this on a GM engine where the Injector Voltages peaked at just under 80 Volts therefore the 20:1 atten...
by Lee
Mon Jun 28, 2010 1:48 pm
Forum: Automotive kit hardware
Topic: Mixmaster 12-channel automotive signal mixer power supply
Replies: 1
Views: 5373

Re: Mixmaster 12-channel automotive signal mixer power supply

Hi Ian Thank you for your suggestion and I have spoken to the Development Engineers and put forward your suggestion however they informed me that they did look into this however the reasons for using the 9V battery is as follows:- The Mixmaster needs a +/- supply internally as you can appreciate vol...
by Lee
Wed May 12, 2010 8:02 am
Forum: PicoDiagnostics software
Topic: Battery Test
Replies: 1
Views: 5711

Re: Battery Test

Hi Ryan It is getting more common now to see 2 x 12 Volt batteries used in Parallel especially in Commercial Vehicles due to the High Currents Drawn through the system and the need for a Larger Capacity to Operate More Accessories. In regards to testing these set ups it is possible through Pico Diag...
by Lee
Wed Mar 17, 2010 1:19 pm
Forum: PicoScope 6 Automotive software
Topic: voltmeter like in pico r5
Replies: 2
Views: 6240

Re: voltmeter like in pico r5

Hello Mathias Unfortunatley this was a function of PicoScope Version 5 but was not carried on into Version 6. As PicoScope 6 has so many advanced functions and capabilities it made it almost impossible to get this in aswell. Therefore this isnt something you have missed in PicoScope 6, it just isnt ...