Search found 38 matches

by tangoman
Sun Jan 24, 2016 2:50 am
Forum: Case studies
Topic: Mass air flow meter
Replies: 4
Views: 8598

Mass air flow meter

Alfa 156 twin spark come into my work shop with bad flat spot when cold the car had a new Air flow meter just a few hours old and was ask to see why it had bad flat spot so check for codes no codes so set up the 02 sensor and TPS and airflow PID on scan tool and went for a drive give it full throttl...
by tangoman
Sun Jul 19, 2015 10:12 pm
Forum: Case studies
Topic: Toyota hiace 2013 Air Cond cuts out
Replies: 1
Views: 4512

Toyota hiace 2013 Air Cond cuts out

This is can high can low on a 2012 Toyota came in to my work shop from a Toyota dealer they just fitted a new Air con comp and they had order a new ECU no ECU in the Australia new one coming from Japan the bill was up to $2500 and car still not fixed ? problem with car air cond cuts out after motor ...
by tangoman
Sun Nov 30, 2014 9:44 am
Forum: Case studies
Topic: Inlet and exhasut camshaft sensors
Replies: 4
Views: 13110

Re: Inlet and exhasut camshaft sensors

Yes just have a look at the scan data and your see it was in sync with the crank sorry not in sync with the cam
by tangoman
Thu Nov 13, 2014 2:11 pm
Forum: Case studies
Topic: 2010 VW Caddy
Replies: 1
Views: 8385

2010 VW Caddy

Was ask to check and diagnose a VW Caddy 2010 to see why the oil light was coming on only sometimes by a workshop I do work for last week .it had a new oil pressure switch fitting and the oil pressure was check and was told it was 50psi so it cant not be oil pressure losing pressure but was told the...
by tangoman
Thu Nov 13, 2014 11:17 am
Forum: Case studies
Topic: Inlet and exhasut camshaft sensors
Replies: 4
Views: 13110

Inlet and exhasut camshaft sensors

2004 Ford Territory 4WD/AWD 4.00 litre .. I was called out to a work shop last week to check and diagnose this car .I scanned it and came up with a code p0340 inlet camshaft position sensor and p1340 Exhaust camshaft position sensor ? Hard to believe this needed two cam sensors, so I had a look at s...
by tangoman
Tue Jun 17, 2014 11:09 am
Forum: Diagnostic discussion
Topic: ford focus 2002 high idle, exhaust glows
Replies: 8
Views: 12961

Re: ford focus 2002 high idle, exhaust glows

Bosch was using the FSA 560 back then lots of money not sure how much i don't work for a Bosch service central any more you have to work for Bosch to do most of there training... i use my Pico scope everyday its very easy to use ... but using a scope 20 years ago is no difference then using one toda...
by tangoman
Fri May 02, 2014 9:42 pm
Forum: Diagnostic discussion
Topic: ford focus 2002 high idle, exhaust glows
Replies: 8
Views: 12961

Re: ford focus 2002 high idle, exhaust glows

Hi just like to say training in Australian is very good Bosch Australia has got some of the best training you will get they was training us about scopes more then 20 years ago I have a Pico scope myself and all the training I have had using scopes was from Bosch Australia and we was using low curren...
by tangoman
Fri Apr 18, 2014 2:56 am
Forum: PicoDiagnostics software
Topic: Motorcycle software
Replies: 3
Views: 10928

Re: Motorcycle software

only one thing I don't see in the Pico scope software you don't have two cylinders to pick from when you do a compression test and you all know that all of Ducati motors are two cylinders ok the motor GP Ducati are L 4 not L two cylinders but most of us don't work on motor GP bikes so please next up...