Search found 39 matches

by Damian Mc Bride
Thu Jan 03, 2013 10:31 am
Forum: Automotive kit hardware
Topic: WPS Compression Hoses
Replies: 23
Views: 49497

Re: WPS Compression Hoses

Thanks rob looks like its time to open the wallet :)
Damian
by Damian Mc Bride
Thu Jan 03, 2013 8:31 am
Forum: Automotive kit hardware
Topic: WPS Compression Hoses
Replies: 23
Views: 49497

Re: WPS Compression Hoses

Just noticed in description of TA088 M14 high–strength compression hose with adapter for deep reach spark plugs .
This is prob what i need.
Damian
by Damian Mc Bride
Thu Jan 03, 2013 8:27 am
Forum: Automotive kit hardware
Topic: WPS Compression Hoses
Replies: 23
Views: 49497

Re: WPS Compression Hoses

Thanks Rob i just measured a few plugs most standard 14mm plugs have thread length of about 17mm.
The focus plug (NGK tr5a10) has a thread length 25mm, the TA088 wont reach the first thread inside head.
Is the TA105 14MMx1.25 thread.
Damian
by Damian Mc Bride
Wed Jan 02, 2013 11:07 pm
Forum: Automotive kit hardware
Topic: WPS Compression Hoses
Replies: 23
Views: 49497

Re: WPS Compression Hoses

The reason i asked about the focus is went to do a compression test on one and the standard adaptor in my sealy kit wouldnt fit, the threads were not long enough.

Rob have you used the ford triton hose, what dose it fit.
Damian
by Damian Mc Bride
Wed Jan 02, 2013 8:42 pm
Forum: Automotive kit hardware
Topic: WPS Compression Hoses
Replies: 23
Views: 49497

Re: WPS Compression Hoses

Hi im thinking of buying a WPS500x the kit comes with 3 compression hoses M10, M14 and ford triton, but there are 2 more available M12 and M18. Dose anyone know is the ford triton the hose needed for the 1.4/1.6 focus from 1998 on. Im trying to figure if i should buy the kit or select just a few hos...
by Damian Mc Bride
Tue Nov 06, 2012 8:24 pm
Forum: Automotive kit hardware
Topic: 600amp clamp problem
Replies: 1
Views: 5450

Re: 600amp clamp problem

Ordered a new one today
Damian
by Damian Mc Bride
Wed Oct 31, 2012 1:31 pm
Forum: Automotive kit hardware
Topic: 600amp clamp problem
Replies: 1
Views: 5450

600amp clamp problem

Hi i tried to use my 600amp clamp(TA019) yesterday, when i switch it on it reads off the scale on 600amp setting, or reads 5.6volts on voltage scale without being connected to car :cry: My question is can these be tested/fixed or is it not worth the bother should i just order a new one. I did open i...
by Damian Mc Bride
Tue Oct 30, 2012 9:05 pm
Forum: Diagnostic discussion
Topic: 01 Corsa z10xe crank/cam
Replies: 9
Views: 14573

Re: 01 Corsa z10xe crank/cam

Got this sorted today the chain had nearly worn through the side cover. Inlet cam was less than a tooth out but not lining up(chain stretch) but exhaust cam was about 3 teeth out. It now runs as good as a 3cyl corsa can, still sounds crap :D Thanks again for replies, and as promised the after trace....
by Damian Mc Bride
Sun Oct 28, 2012 6:41 pm
Forum: Diagnostic discussion
Topic: 01 Corsa z10xe crank/cam
Replies: 9
Views: 14573

Re: 01 Corsa z10xe crank/cam

Thanks Darren
by Damian Mc Bride
Sun Oct 28, 2012 9:13 am
Forum: Diagnostic discussion
Topic: 01 Corsa z10xe crank/cam
Replies: 9
Views: 14573

Re: 01 Corsa z10xe crank/cam

Thanks Rob.
Will post up another waveform when its fixed.
Damian