Hello Ben.

I also tried with ; but that dosent Work.

As i said i have tried both with , . ; : but nothing Works

But if i change the formula to for examble:
freq(A/48)*(3.44*0.625)*60/1000 it Works

Also tried to change the language in the Pico software to English, but it stil does not Work.

Hello Steve. Tried some different Things Both with , . ; bot no change Now i tried the following: freq(A/48)*(3.14*0.625)*60/1000 - Does not Work freq(A/48)*( 3.1 *0.625)*60/1000 - Does not Work freq(A/48)*( 3.2 *0.625)*60/1000 - Works freq(A/48)*( 3.3 *0.625)*60/1000 - Does not Work freq(A/48)*( 3....

Hello Steve. Thank you for this great post. and for the hard Work you put into this forum tread. Math is Cool, but i cannot get it to Work. I have downloaded the pico files, but the mathchannels does not appear. The strange thing is that the math channels is shown in the thumbnails on my desktop. I ...

Hello RBMACDONELL You have not missed anything. :D We need to reference the starter motor current to a known event, to be able to identify cylinders. That reference you are mentioning, is not shown in this case study, cause i lost that capture. :oops: Therefore i labeled the events manually to be ab...

Hello Pico. I recently bought the PQ071 Sight block kit. and i am very happy with it. I would like to make some custom hoses for testing different diesel systems, and therefore I would like to by some ekstra hose fittings. They are labeled TA318, TA319 and TA320 But i cannot find them on your web si...

Diagram and ECU Pinout information sent.

It is exactly as Volrem said:

This MAF doesn't have 5V feed from ECM. It uses only 12V from fusebox. Ground is from ECM, MAF signal is digital and fourth wire is for air temp.

Hello Piconewtrain.

If you could PM me the VIN i will look in Volvo Vida for the wiring diagram.

Regards Martin

Hello Steve. This is a great tip, and i will try this the next time a car with a failed bearing rolls into the shop. This seems to be a much better way to confirm a failed bearing (And to document the repair) If we just want to listen to the bearings, could we then skip the use of channel a and b in...

This Citroen was towed in with a customer complaint that it runs on 3 cylinders, and there is a loud knocking or puffing noise from the engine 1.PNG The first thing I did was to perform a relative compression test, to verify the mechanical state of the engine. Something is definitely wrong with this...

Thanks for answering. First of all, the car is now repaired with a new left front Wheel bearing. This was diagnosed on the hoist with a stethoscope, prior to posting here. The goal was not to diagnose this car, but to learn more about my new NVH Tool. So what did i learn... :-) As Mark pointet out, ...