If I am able to upload the VERUS pids I will, however I know what the 02S bank 1 sensor 2 is sending to the ECU, the ECU is then showing the response through the ECU from the sensor. I have also tested the sensor using a Fluke DMM and the lambda sensor is working. The fault codes description being p...

I'm impressed with the NVH kit as I see the results here, very interesting. I used to call the wheel bearings when rough in operation 'Rarefraction', then one day a customer pointed out he did not know what I meant, so I had to stop writing my reports that way, shame really.

I admit not being in that part of the country I've not done anything with Bosch. From your description their courses come across like the City and Guilds Craft Studies courses and the electronics and microprocessor course I did in the 1980's, they also went into much detail about the function and op...

I spoke to her mum today in Sainsbury's, her boyfriend paid recently £4500 for the car and when she took the car her boyfriend took the car to a garage he knows who told him the engine is duff and requires a new one, at some major costs. I was not convinced these MINI engines burning oil at 40K mile...

I assume at this point you are just trying to get rid of the heater circuit code on the O2. I think a quick and dirty test would be to put a standard incandescent test light in place of the heater delete the code and run the engine you should see the light illuminate (probably pulsed on and off) an...

Morning tech , Could you look at the ,map,iat,tp upstream 02 serially from cold start through warm up im still trying to understand the rough running in conjunction with the post cat o2 dtc . Please humour me as I am not with the vehicle but would if possible like to assist. Does this only occur fr...

STC,

Given that you disagree with everything said, and you disagree with AD's test procedures as well, there is no pleasing you, so I have a solution.

You tell me how the circuits based on the two fault codes should be tested, the only code returned is the lambda code after road test.

I take your points on board, yes I have used AD's wiring diagram and their checking procedure. I have just learned today after litace post to check the fuses and power supplies that unless the engine is actually running there is no battery voltage to the fuses, which supply the power supplies for th...

Check ALL ecu supply voltages, could have one missing, fuses, there's 3 or 4 on this for engine ECU supply Thanks Liteace. I was not sure whether the car was being taken by the customer or not, but today it seems the car has been left with me, so after I speak to the customer, hopefully I'll see th...

Any update on this, sounds interesting. If only a PicoScope was owned & used, this has the makings of a great case study. Very true Mike, and although I might not get the opportunity on this occasion to use a Pico on it, there be other opportunities I'm sure where I can use it and a video presentat...