Hello, Just wanted to add a couple of thoughts. The first one being pump timing. I know these will be geared so there isn't any movement and being a new tractor with low hours, it's unlikely but not impossible. Following on from the post where we looked at using the derivative maths function to look...

Thank you for the capture as it really helps to understand how to recreate the issue. It appears that this was a problem that has now been resolved in the latest Early Access version. Would you be able to try this version of PicoScope 7 Automotive for me and see if you are still seeing the problem? ...

Hello, Please accept my apology in this late reply and sorry to hear you seem to be having some problems with the frequency measurement. I have a few questions if that is ok. You mention using PicoScope 7, is the stable or Early Access build? Is it possible to provide the PSDATA file which you are r...

Hi Andy, Firstly, I must apologise for the late reply. Thank you for raising this subject. I can imagine that some of the subjects on the forum can seem a little overwhelming for a new user. We do have a number of other resources available though that can help new users gain confidence in scope use....

Hello Geoff, Welcome to the forum and your Pico journey! Great to have you onboard and we are all here to support and help you along the way. Nice to see your investing in the training for EV as the world slowly shifts towards this mode of transportation. I will point you towards the following post ...

Hello Burt_100, Thank you for your post. Lets tackle one thing at a time and to start with that it seems to not decode. This was due to a slight oversight in the decoder settings where the threshold was set to 3.6V and so outside of where the packet actually is. The decoder will try to fit the signa...

Hello all, I'm after some help. We all know that PicoScope can be used for more than just automotive vehicles - hence this section of the forum. It would be great to see more and more non automotive waveforms in the waveform library. Could I ask that if anyone as any waveforms that might be suitable...

Hi Hamish, Great to have you here and also thank you for imparting your knowledge for the future generations. The forum is a great with a lot of information to take in. To help contain all this information in one place we have a useful links page which you can see here - https://www.picoauto.com/sup...

Hi all, Thank you both for your comments and glad it is an interesting topic. There is lot still unknown about these motors. I have found an interesting PDF surrounding some of the use of hall sensors in these motors which is below. Hall sensors for 3 phase BLDC.pdf Of course this document won't be ...

Recently I found myself going back over some old captures to see which ones might be useful to upload to the waveform library and I stumbled upon some captures I made to follow up on the JCB JS220 EGR fault case study. You can see the full case study here - https://www.picoauto.com/library/case-stud...