Hei,

I did that the oil level was 73mm and after replacement 67mm.

Thanks for the advice

Hello just to say I am now finished with BMW. I am replacing the injector cyl.1, all COP and spark plugs. The engine works quite well but I noticed that the mixture is still rich in bank 1. STFT came down from -25 to -5 and here are stuck and lambda is to highly, that's why I gave the car owner to d...

Hi guys Here I am again. I'm still fight with BMW. Mounted the new coils and spark plugs but without success... Then I made a test injectors and finally ... As soon as I mounted the new injector I will continue with waveforms. I also saw that compression is not good but we'll see how it will work wi...

Hei,

thank you for your answer, tomorrow I get a new coil and spark plugs so I'll make a recording.

Regards

Hallo, motor N43B20A difficult to start, no idle and when motor runing cca. 200 rpm I hear misfire. I thinks the COP secondary go to ground ... but all 4 ?! Can someone help me in diagnosis waveforms? It's strange waveform... blue chanel - all 4 COP red chanel - cyl.1-cyl.2-... primary Thanks and re...

Plus batt - alternator B+.jpg 130A Bosch.psdata Thank you all for your answers. I'm glad that I read the answers of experts. I apologize because my English is not good. To answer these few questions: 1. First DMM probe is connect to minus battery and engine block and get 160mV, second on battery pl...

Thanks, I just upload a few waveforms now.

The voltage difference between the engine block and battery minus is 160 mV but all consumers is ON and it is about 110A ... How much is the maximum voltage difference when he spends so much ampers?

Regards

Hallo,
can someone explain to me how to add some of my waveforms in Waveform Database?

Thanks

Nice, thanks.