For me the problem is somewhere else, the noise on the signal crankshaft is not a problem, I would check with compression and scann tool drift correction and injectors.
Regard.
Also what margin would you allow, =/- 0.1V ? FF Yes the margin is +-0,1V. Hi FF, I think that it would be almost impossible to predict what airflow a MAF is reading (digital or analogue) without (as Tode says) having an extensive library of signal conversion files, and therefore it would be difficu...
Hello FF, I to see if the MAF is calibrated, using a very simple method: - Ignition on and engine off, I read the voltage of the MAF if Bosch must be 1.0V and remain stable for a few minutes, sometimes it happens that the sensors start at 1.2V or 0.8V, if not calibrate or waiting a few minutes the v...
If the flywheel has holes as a reference signal should be overturned, but it depends on how you connect the leads, as with any inductive sensor when connected to "reverse" the shape is reversed, I think that if the connecting wire pickup also change the signal remains consistent with the presence of...
I do not know if I can be helpful, but I have had problems like this using USB cables are not original and maybe of poor quality, and PC with driver problems of USB ports, in addition to the usb cable problem, I tried to uninstall the software pico, delete its folder (remaining files), clean logs wi...
I think that the electrically egr valve has nothing, could be stuck or broken mechanically, but before removing it I would check the air mass values with diagnostic tool, to a minimum with egr closed (loose connector) about 370/380 mg/cp (41 Kg/h or 11 g/s) if the values are different, perhaps l...
Thanks Mike, I understand what it is , but I wanted to know if anyone uses this method to analyze some component, for example, pressure sensor, x-axis = pressure, Y-axis= voltage ... to learn new methods of diagnosis.
Best regards
I hope I have chosen the correct section, I wanted to ask someone with more experience, as may be useful for me to use the "XY display", then a physical quantity in terms of another, instead of the time. Does anyone use this feature to test some special measures?
My English is poor, and the translator helps me a little, I do not know if you speak of an oscilloscope, or advertising of sweets ...... but to me pice both ideas and I'm very curious .
with estimate
Electrically, the fuel pump does not have anything, but we need to see mechanically, or a problem with the pressure regulator, to be sure, you can check the fuel pressure and flow.