Hello Brad and thank you for the post Welcome to the forum and to PicoScope which I promise you will open up a whole new world of diagnostic capabilities Please feel free to post/share your experiences as you go and challenge the theories and techniques already shared here on the forum Take care.......

Hello and thank you for the post I have tried to play the video above but the message returned suggests "The video is unavailable" Either way, please accept our sincere apologies for the issue you have experienced with the USB connector at the rear of the scope You are absolutely correct when you sa...

Hello Hiram and sorry for the late feedback. So much going on as ever and not enough time to “dig in” The frequency for torque convertor shudders at 20 to 28 Hz is very interesting but I have no literature or captures to support these values. I am intrigued and would love to get in touch with Steve ...

Hello and thank you for the post. Initially the purchase of the differential probe should be governed by the expected peak voltages you are likely to measure. Past experience with Hybrid vehicles would have found the TA041 (700 V Max Diff Probe) to be sufficient, however this is creeping over 1000 V...

Thank you for the feedback. Rest assured your scope specification and performance is fine and a better scope today then when developed thanks to the hard work of the software team here at Pico. NVH performs well regardless of scope age as just this week I have been supporting the use of a 3223 model...

Hello and thank you for the continued feedback. The Function Generator function is "greyed out" by default and will only function when a NVH licensed automotive scope is connected to the PC. Given you have an NVH licensed automotive scope, yet the Function Generator remains greyed out, suggest the s...

Hello again and thank you for the feedback. Our NVH software will record up-to 500 seconds of data if required, but remember this will increase your file size as a result. By default the signal history is 50 seconds long and the only data saved is the data captured within the visible 50 seconds.The ...

Hello Steve and thank you for the post

The image below will help but you can edit the measurement font from the Measurement Tab using the "Grid Font Size"
I hope this helps, take care.....Steve

Hello Adam thank you for the feedback. As Ben has mentioned in his reply to your support desk request, we have Episode 1 of our 7 episode NVH feature here: There is also a brief overview video

Jump to post